To Next PageTo Next Page
Need help?Do you have a question about the Daikin FCA71AV16 and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity | 7.1 kW |
| Heating Capacity | 8.0 kW |
| Power Supply | 220-240V/1 Phase/50Hz |
| Refrigerant | R32 |
Essential steps and checks before commencing the installation process.
Lists all the accessories provided with the unit for installation.
Details on optional accessories available for the indoor unit.
Key items to check during construction and after installation completion.
Important notes and checks for the installer regarding the unit.
Guidelines for choosing an appropriate installation location for optimal performance.
Details on ceiling opening dimensions and suspension bolt placement.
Steps for creating the necessary ceiling opening for installation.
Instructions for securely installing suspension bolts for unit mounting.
Procedure for installing the indoor unit in new ceiling constructions.
Procedure for installing the indoor unit in existing ceiling structures.
Procedure for insulating the gas refrigerant piping to prevent condensation.
Procedure for insulating the liquid refrigerant piping to prevent condensation.
Guidelines for proper drain piping to ensure effective water drainage.
Precautions for installing drain pipes that require a vertical lift.
Instructions for wiring the units and connecting the earth wire.
Procedure for connecting the remote controller wiring.
Example wiring for a standard system with one remote controller.
Wiring example for controlling multiple units simultaneously.
Example wiring for controlling multiple units via group control.
Wiring example for controlling one unit with two remote controllers.
Setting the system based on the ceiling height.
Configuring the airflow direction for optimal air distribution.
Procedure for setting the system when optional accessories are attached.
Steps to set up and use the wireless remote controller.
Adjusting fan speed when the thermostat is off.
Configuring the filter cleaning notification settings.
Setting the number of indoor units for simultaneous operation.
Individual setup for master and slave units in simultaneous operation.
Important safety cautions to observe during servicing operations.
List of malfunction codes and their corresponding meanings.
Steps for safely unpacking the indoor unit from its packaging.
Guidelines for required service space around the outdoor unit.
Steps for safely unpacking the outdoor unit from its packaging.
Instructions for properly packing the outdoor unit for transport or storage.
Essential steps and guidelines to follow before operating the unit.
Precautions for group control and dual remote controller systems.
Identification and description of the unit's various parts.
Specifies the operational temperature and humidity limits for the unit.
Factors to consider when selecting a suitable installation site.
Step-by-step guide for operating the air conditioner.
How the horizontal blades adjust airflow direction in different modes.
Tips for ensuring the system operates optimally and efficiently.
Instructions on how to clean the air filter.
Procedure for cleaning the unit's suction grille.
How to clean the air outlet, outside panel, and remote controller.
Guidelines for cleaning before and after seasonal use.
Procedures for starting the unit after a prolonged period of inactivity.
Instructions on how to properly shut down the unit for extended periods.
Troubleshooting steps when the unit fails to operate.
Diagnosing and resolving intermittent operation stoppages.
Troubleshooting problems related to incorrect fan speed settings.
Addressing issues where airflow direction differs from settings.
Resolving issues with horizontal blades failing to close after operation.
Understanding and addressing white mist appearing during operation.
Identifying and resolving unusual noises from the air conditioner.
