EasyManua.ls Logo

Daikin FDMG36NUV14 User Manual

Daikin FDMG36NUV14
501 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Pocket
Manual
Service Diagnosis
Si20 - 701_B

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Daikin FDMG36NUV14 and is the answer not in the manual?

Daikin FDMG36NUV14 Specifications

General IconGeneral
Heating Capacity36000 BTU/h
RefrigerantR-410A
Indoor Unit Dimensions (H x W x D)12.4 x 43.3 x 19.7 inches
Outdoor Unit Dimensions (H x W x D)32-11/16 x 37 x 13-3/8 inches
Cooling Capacity36, 000 BTU
Power Supply208-230V, 1 Phase, 60Hz

Summary

2. Symptom-based Troubleshooting

2.1 Overview

Provides a general overview of common symptoms and corresponding measures for troubleshooting.

2.2 Equipment does not Operate

Details potential causes and solutions when the equipment fails to operate.

2.3 Indoor Unit Fan Operates, but Compressor does not Operate

Addresses scenarios where the indoor fan runs but the compressor remains inactive.

2.4 Cooling / Heating Operation Starts but Stops Immediately

Guides on diagnosing and resolving issues where the unit stops shortly after starting.

2.5 After Unit Shuts Down, It cannot be Restarted for a While

Explains how to handle situations where the unit cannot be restarted immediately after shutdown.

2.6 Equipment Operates but does not Provide Cooling

Provides steps to diagnose and fix problems related to lack of cooling performance.

2.7 Equipment Operates but does not Provide Heating

Offers solutions for when the unit operates but fails to provide adequate heating.

2.8 Equipment Discharges White Mist

Addresses troubleshooting for the symptom of white mist discharge from the equipment.

2.9 Equipment Produces Loud Noise or Vibration

Guides on identifying and resolving causes of excessive noise or vibration during operation.

2.10 Equipment Discharges Dust

Details how to address issues related to the equipment discharging dust.

2.11 Remote Controller LCD Displays "88"

Explains how to troubleshoot when the remote controller's LCD displays "88".

3. Troubleshooting by Remote Controller

3.1 Procedure of Self-diagnosis by Remote Controller

Outlines the steps for performing self-diagnosis using the remote controller.

3.2 Error Codes and Description

Lists and describes various error codes displayed by the system for diagnosis.

3.2.1 Indoor Unit

Details error codes related to indoor unit components and their troubleshooting.

3.2.2 Outdoor Unit, System

Covers error codes associated with outdoor units and system-wide issues.