Need help?Do you have a question about the Daikin FDY20KAY1 and is the answer not in the manual?
General| Heating Capacity | 2.5 kW |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 800 x 295 x 223 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
Details about group control and two remote controller systems.
Identifies indoor/outdoor units, remote controller, and electrical connections.
Recommendations for safe operation and handling before use.
Specific warnings about direct cold air, abnormal conditions, and installation risks.
Specifies temperature ranges for cooling operation.
Specifies temperature ranges for heating operation.
Lists unsuitable locations for air conditioner installation.
Requirements for electrical wiring by authorized personnel.
Considerations for noise and vibration impact on neighbors.
Importance of proper drain piping to prevent water leakage.
Function of the power button, operation lamp, and general display icons.
Details on various display indicators like operation mode, temperature, and time.
Functions of buttons for setting timers and selecting operation modes.
Explains the usage of specific buttons for settings and operations.
How to start and stop the unit using the ON/OFF button.
Information on defrost operation and heating capacity related to outside temperature.
Steps for setting the desired temperature using the remote controller.
Recommendations for proper operation, airflow, temperature, and energy saving.
Essential safety instructions for service personnel before performing maintenance.
Guidance on cleaning the air filter and suction grille.
Instructions for fan belt tension and cleaning external panels.
Steps for starting up after a long stop and preparing for long-term shutdown.
Explains why the system might not start immediately.
Explains common visual and auditory occurrences during operation.
Explains dust expulsion and absorption of room odors by the unit.
Emergency steps for burning smells, water leaks, or safety device issues.
Troubleshooting steps for complete system failure or unexpected stops.
Solutions for poor performance due to obstacles, filters, or environmental factors.
To Next Page
