Daikin FFA60RV1A - How to Check the Initial Set Value

[Remedial action]
Check the malfunction code on the remote
controller and contact your local dealer. (Refer to
page 12)
13. HOW TO CHECK THE INITIAL
SET VALUE
Further question regarding to the available
functions, contact your local dealer with your
initialsettingvalueconrmedbyusingtheremote
controller with the following steps.
1
Press the INSPECTION button to select
the inspection mode “
”.
The initial set value
Press the button 2 times to return to
normal operation mode.
13 English
02_EN_3P477582-1.indd 13 6/15/2017 15:17:42