Indoor Unit Control (RA Models) SiBE121135
96 Function and Control
Brightness
Setting
The brightness of the multi-colored indicator lamp can be adjusted L (low), H (high), or OFF.
1. Press the center of the [Temp] button and the [Mode] button at the same time.
5C is displayed on the LCD.
2. Select L (light) with the [Temp]
or button.
3. Press the [Mode] button to enter the brightness setting mode.
4. Press the [Temp]
or button to adjust the brightness of the multi-colored indicator lamp.
5. Press the [Mode] button for 5 seconds to exit from the brightness setting mode.
(When the remote controller is left untouched for 60 seconds, it returns to the normal mode
also.)
(R11669)
(R11911)
(R11912)
L (low)
H (high)
OFF
(R11913)
To Next Page
Loading...
