SiBE121135 RA Indoor Unit
Operation Manual 135
FVXG25/35/50K2V1B
Name of Parts
Indoor Unit
Radiant panel
Front panel
Display
Air outlet
Louvers (vertical blades)
• The louvers are inside of the air outlet.
Room temperature sensor
• It detects the air temperature around the unit.
Flap (horizontal blade)
TIMER lamp (yellow)
RADIANT lamp (red)
Signal receiver
Sound type
beep-beep
beep
long beep
Indoor unit ON/OFF switch
• This switch is useful when the remote controller is missing.
Air inlet
Mode
AUTO
Temperature setting
25˚C
Airflow rate
AUTO
Case
Operation start
Setting changed
Operation stop
Signal receiver and Indoor
unit ON/OFF switch
• It receives signals from the remote controller.
• When the unit receives a signal, you will hear
a beep sound.
• Press this switch once to start operation.
Press once again to stop it.
• The operation mode refer to the following table.
OPERATION lamp
(green)
To Next Page
Loading...
