SiBE121135 RA Indoor Unit
Operation Manual 225
2.3.5 POWERFUL Operation
POWERFUL Operation
NOTE
1, 2
POWERFUL operation quickly maximizes the
cooling (heating) effect in any operation mode. You
can get the maximum capacity.
To start POWERFUL
operation
To cancel POWERFUL
operation
1. Press “POWERFUL button”.
• POWERFUL operation ends in 20
minutes. Then the system
automatically operates again with the
settings which were used before
POWERFUL operation.
• When using POWERFUL operation,
there are some functions which are not
available.
• “ ” is displayed on the LCD.
2. Press “POWERFUL button”
again.
• “ ” disappears from the LCD.
Notes on POWERFUL operation
• In COOL and HEAT mode
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased
and the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.
• In DRY mode
The temperature setting is lowered by 2.5˚C and the air flow rate is slightly increased.
• In FAN mode
The air flow rate is fixed to the maximum setting.
To Next Page
Loading...
