Daikin FFQ35B9V1B - Page 358

Outdoor Unit: 40-75 Class SiBE121135
346 Removal Procedure
15
The figure shows the
arrangement of the wire
harnesses under the
electrical box.
16
Pull out the clamp of the
thermistor lead wire.
2. Remove the electrical
box.
1
Remove the 2 screws
of the earth wires.
2
Remove the screws on
the terminal board and
disconnect all the
connecting wires and
power supply wire.
Step
Procedure Points
(R5527)
Thermistor lead wire
(R17257)
Fixing position for the
thermistor harness
 When reassembling, insert
the clamp into the small hole.
(R11178)
(R11179)