Why is my Daikin FLKS25BVMB cooling effect poor?
If the cooling or heating effect of your Daikin air conditioner is poor, consider the following: * Ensure the air filters are clean. * Check for any obstructions blocking the air inlet or outlet of the indoor and outdoor units. * Verify that the temperature setting is appropriate. * Confirm that all windows and doors are closed. * Make sure the airflow rate and direction are set correctly.
How to fix Daikin FLKS25BVMB operation that does not start soon?
If your Daikin Air Conditioner operation does not start soon, you should wait for about 3 minutes.
Why hot air does not flow out soon after starting heating operation on my Daikin FLKS25BVMB Air Conditioner?
If hot air does not flow out soon after you start the heating operation on your Daikin air conditioner, you should wait for 1 to 4 minutes.
What to do if my Daikin Air Conditioner does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check these items: * Confirm that a breaker hasn’t turned OFF or a fuse blown. * Check for a power failure. * Ensure batteries are properly set in the remote controller. * Verify that the timer setting is correct.
What to do if an abnormal functioning happens during Daikin FLKS25BVMB Air Conditioner operation?
If an abnormal functioning occurs during operation of your Daikin air conditioner, turn the breaker OFF, then turn it back ON, and try operating the air conditioner with the remote controller.
Why did my Daikin FLKS25BVMB Air Conditioner operation stopped suddenly but the OPERATION lamp is on?
If your Daikin air conditioner operation stopped suddenly but the OPERATION lamp is on, it automatically resumes operation in about 3 minutes.
What to do if the heating operation stops suddenly and a flowing sound is heard in my Daikin FLKS25BVMB Air Conditioner?
If the heating operation of your Daikin air conditioner stops suddenly and a flowing sound is heard, you should wait for about 4 to 12 minutes.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor Unit) | 19 dB(A) |
| Type | Split System |
| Outdoor Unit Dimensions (HxWxD) | 550mm x 780mm x 285mm |
Covers sensor malfunctions, overload detection, and insufficient gas detection.
Provides diagnostic procedures, error codes, and troubleshooting for system faults.
Lists common problems and their corresponding measures for troubleshooting.
Explains how to use the remote controller to perform service check functions and read codes.
Provides detailed error codes, descriptions, and troubleshooting flowcharts for various faults.
Provides detailed wiring diagrams for indoor and outdoor units.
To Next Page
