SiBE05-513A
Removal Procedure 121
Part 7
Removal Procedure
1. Indoor Unit...........................................................................................122
1.1 Removal of the Air Filter / Front Grille ..................................................122
1.2 Removal of the Front Panel..................................................................125
1.3 Removal of the Horizontal Blade..........................................................127
1.4 Removal of the Signal Receiver Unit / Swing Motor.............................128
1.5 Removal of the Discharge Grille...........................................................129
1.6 Removal of the Drain Pan ....................................................................130
1.7 Removal of the Electrical Box / PCB ....................................................131
1.8 Removal of the Fan Rotor / Fan Motor.................................................134
1.9 Removal of the Heat Exchanger ..........................................................136
2. Outdoor Unit........................................................................................138
2.1 Removal of Panels and Fan Motor.......................................................138
2.2 Removal of Electrical Box ....................................................................145
2.3 Removal of Reactor and Partition Plate ...............................................147
2.4 Removal of Sound Blanket...................................................................149
2.5 Removal of Four Way Valve.................................................................151
2.6 Removal of Compressor.......................................................................153
2.7 Removal of PCB...................................................................................155
To Next Page
Loading...
