Why is my Daikin Air Conditioner cooling effect poor?
A weak cooling effect may be due to several reasons. Check if the air filters are clean and ensure that nothing is blocking the air inlet or outlet of either the indoor or outdoor units. Verify that the temperature setting is appropriate, all windows and doors are closed, and the airflow rate and direction are correctly set.
What to do if my Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
If the operation of your Daikin Air Conditioner suddenly stops and the OPERATION lamp is flashing, check if the air filters are clean and inspect the air inlet and outlet of both indoor and outdoor units for any obstructions. Clean the filters or remove any obstacles, then turn the breaker OFF and back ON. After that, try operating the air conditioner using the remote controller.
What to do if my Daikin Air Conditioner does not operate and the OPERATION lamp is off?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, check the following: ensure that a breaker hasn’t been turned OFF or a fuse hasn’t blown, verify there isn't a power failure, confirm that batteries are correctly installed in the remote controller, and ensure the timer setting is correct.
What to do if the Daikin Air Conditioner operation stopped suddenly and the OPERATION lamp is on?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is on, it might be due to a large voltage fluctuation, which triggers a system protection mechanism. The unit will automatically resume operation in about 3 minutes.
How to fix Daikin Air Conditioner remote controller with no signals, low sensitivity, low contrast, or display out of control?
If you're experiencing issues with your Daikin Air Conditioner remote controller such as no displayed signals, low sensitivity, low contrast, a blacked-out display, or the display running out of control, the batteries may be weak or the remote controller may be malfunctioning. Replace all the batteries with new AAA alkaline batteries. If a reset button is available, press it after replacing the batteries.
General| Model | FT35GV1G6 |
|---|---|
| Category | Fan |
| Air Flow | Not available |
| Noise Level | Not available |
| Power Consumption | Not available |
| Voltage | Not available |
| Frequency | Not available |
| Weight | Not available |
To Next Page
