What to do if Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
If the Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstructions. Then, turn the breaker OFF, and then turn it ON again. Try operating the air conditioner with the remote controller. If the lamp continues to blink, further assistance may be needed.
What to do with Daikin FT60FVM Air Conditioner after a power failure?
After a power failure, the Daikin Air Conditioner will automatically resume operation in about 3 minutes. Please wait for a while.
What to do with Daikin FT60FVM during lightning?
If lightning may strike the neighboring area, stop the Daikin Air Conditioner operation and turn the breaker OFF for system protection.
Covers major warnings (WARNING/CAUTION) and general safety advice for safe operation and installation.
Details precautions against fire, explosion, injury, electrical shock, and improper handling of the unit.
Covers safe operation, installation site selection, noise considerations, electrical work, and system relocation.
Explains how to select and operate the DRY, COOL, and FAN modes.
Details how to start and stop the POWERFUL operation mode.
Explains common situations that may appear as issues but are normal operations.
Provides checks for the air conditioner not operating, poor cooling, and sudden stops.
Lists critical symptoms requiring immediate service and general warnings.
General| Brand | Daikin |
|---|---|
| Model | FT60FVM |
| Category | Air Conditioner |
| Language | English |
To Next Page
