EasyManua.ls Logo

Daikin FTKC71QVM - User Manual

Daikin FTKC71QVM
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter
Wall Mounted Type
4.0/5.0/6.0/7.1 kW Class
18000/24000/28000 Btu/h Class
Si041652EB
Question and Answer IconNeed help?

Do you have a question about the Daikin FTKC71QVM and is the answer not in the manual?

Daikin FTKC71QVM Specifications

General IconGeneral
Cooling Capacity7.1 kW
RefrigerantR32
MountingWall Mounted
TypeWall Mounted
Power Supply230V/50Hz

Summary

Air Filters Removal

Front Panel Removal

Electrical Box Removal

Remove Electrical Box

Steps to detach the electrical box, including handling earth/ground wires.

Remove Electrical Box Assembly

Final steps to remove the electrical box assembly, including screws and hooks.

PCBs Removal

Remove Control PCB

Procedure to remove the control PCB, including disconnecting connectors and unfastening hooks.

Remove Filter PCB

Steps to disconnect terminals and connector, then unfasten hooks to remove the filter PCB.

Remove Intelligent Eye Sensor PCB

Procedure to remove the signal receiver unit and its associated PCB.

Vertical Blade Swing Motor Removal

Remove Vertical Blade Swing Motor

Steps to remove filament tape, screws, and release the shaft for the vertical blade swing motor.

Horizontal Blade Swing Motor Removal

Remove Horizontal Blade Swing Motor Assembly

Procedure to detach the swing motor for horizontal blades along with its link shaft.

Fan Guards and Vertical Blade ASSYs Removal

Remove Vertical Blade ASSYs (Auto-Swing)

Steps to unfasten hooks and remove vertical blade ASSYs from auto-swing models.

Indoor Heat Exchanger Removal

Disconnect Refrigerant Piping

Procedure to disconnect gas and liquid refrigerant piping, drain hose, and remove screws.

Detach Indoor Unit and Piping Fixture

Steps to detach the indoor unit from its plate and remove the piping fixture and auxiliary piping.

Remove Indoor Heat Exchanger

Final steps to unfasten hooks and lift out the indoor heat exchanger.

Fan Rotor and Fan Motor Removal

Remove Fan Rotor;Fan Motor

Steps to detach the fan rotor and fan motor assembly from the unit.

Related product manuals