23
■ Priority Room Setting
The Priority Room Setting requires initial programming during installation. Please consult your
retailer or dealer for assistance.
The room designated as the Priority Room takes priority in the following situations;
1. Priority when POWERFUL operation is used.
〈
Example
〉
* Room A is the Priority Room in the examples.
The indoor units in Rooms A,B,C and D are all operating. If the unit in Room A enters POWERFUL
operation, operation capacity will be concentrated in Room A. In such a case, the cooling efficiency of
the units in Rooms B,C and D may be slightly reduced.
2. Priority when using OUTDOOR UNIT QUIET operation.
〈
Example
〉
* Room A is the Priority Room in the examples.
Just by setting the unit in Room A to QUIET operation, the air conditioner starts OUTDOOR UNIT
QUIET operation.
You don’t have to set all the operated indoor units to QUIET operation.
■ Maximum, Power Input Limitation
• The Maximum Power Input Limitation needs to be set when the unit is installed.
Contact DAIKIN dealer.
NOTE
• Cooling capacity will drop if the Maximum Power Input Limitation is used.
01_EN_3P194550-5C.fm Page 23 Thursday, May 31, 2007 4:13 PM
To Next Page
Loading...
Need help?
General
