To Next Page
T
Terri ChambersSep 12, 2025
What to do if a switch or a button often fails to work properly on Daikin Air conditioning?
- JjaredmooreSep 12, 2025
If a switch or button often fails to work properly, turn the breaker OFF and call the service shop.
What to do if a switch or a button often fails to work properly on Daikin Air conditioning?
If a switch or button often fails to work properly, turn the breaker OFF and call the service shop.
What to do if the safety breaker, a fuse, or the earth leakage breaker cuts off the operation frequently for Daikin Air conditioning?
If the safety breaker, a fuse, or the earth leakage breaker cuts off the operation frequently, turn the breaker OFF and call the service shop.
What to do if the power cord of Daikin Air conditioning is abnormally hot or damaged?
If the power cord is abnormally hot or damaged, turn the breaker OFF and call the service shop.
Why is my Daikin Air conditioning cooling/heating effect poor?
The cooling or heating effect might be poor due to several reasons. Check if the air filters are clean. Ensure there is nothing blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate. Make sure the windows and doors are closed. Confirm that the airflow rate and direction are set correctly. Also, check if the unit is set to INTELLIGENT EYE mode.
What to do if my Daikin Air conditioning does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
What to do if Daikin FTKD60BVMA Air Conditioner has an abnormal functioning during operation?
If your Daikin Air Conditioner malfunctions during operation, it may be due to lightning or radio waves. Turn the breaker OFF, then turn it ON again, and try operating the air conditioner with the remote controller.
Why Daikin Air Conditioner operation stops suddenly and OPERATION lamp is on?
If your Daikin Air Conditioner stops suddenly during operation and the OPERATION lamp is on, it may be due to a sudden large voltage fluctuation. For system protection, the air conditioner may stop operating. It should automatically resume operation in about 3 minutes.
How to improve cooling (heating) effect of Daikin FTKD60BVMA Air Conditioner?
If your Daikin Air Conditioner's cooling or heating effect is poor, check the air filters to ensure they are clean. Also, check for any obstructions blocking the air inlet or outlet. Make sure the temperature setting is appropriate, windows and doors are closed, the air flow rate and direction are set correctly, and the unit is not set to INTELLIGENT EYE mode.
How to stop the bad odor from my Daikin Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
General| Brand | Daikin |
|---|---|
| Model | FTKD60BVMA |
| Category | Air Conditioner |
| Language | English |
Identification and description of components of the indoor air conditioner unit.
Details of the control panel on the main indoor unit.
Identification and description of components of the outdoor air conditioner unit.
Overview and functions of the remote control unit for the air conditioner.
Instructions for installing batteries in the remote controller.
Guidance on how to use the remote controller to operate the unit.
Steps for mounting the remote controller holder on a wall.
Steps to initiate the air conditioner's operation in various modes.
Instructions on how to turn off the air conditioner.
Guide to adjusting the desired temperature for operation.
Procedure for controlling the horizontal air direction with the flap.
Procedure for controlling the vertical air direction with the louvers.
How to activate the POWERFUL operation mode for maximum effect.
Instructions to deactivate the POWERFUL operation mode.
Activating the mode to reduce outdoor unit noise.
Deactivating the mode to reduce outdoor unit noise.
Initiating the HOME LEAVE function to record preferred settings.
Deactivating the HOME LEAVE function.
Activating the infrared sensor for human movement detection.
Deactivating the infrared sensor operation.
Setting the timer to automatically turn the unit off.
Disabling a previously set OFF timer.
Guidelines for operation modes in multi-system configurations.
Instructions for opening, removing, and cleaning the front grille.
Steps for preparing the unit before a period of non-use.
