Need help?Do you have a question about the Daikin FTKD60JVE and is the answer not in the manual?
Key safety warnings and precautions to follow before and after repair work.
Essential safety guidelines to observe when performing repair work on the equipment.
Crucial safety advice to ensure proper product operation and installation after repair.
Technical specifications for various unit types, including outdoor, BP, and indoor units.
Technical specifications for various outdoor unit models, including cooling and heating performance.
Technical specifications for Branch Piping (BP) units, including connection details and capacity.
Technical specifications for general indoor units, covering different types and capacities.
Wiring diagrams and component names for various PCBs and connectors.
Wiring diagram and component names for the Branch Provider Unit.
Wiring diagram and component names for various outdoor units.
Detailed explanation of primary operational functions for split-type indoor units.
Detailed explanation of primary operational functions for split-type indoor units.
Overview of the refrigerant system and the function of outdoor unit components.
Detailed description of key functional parts within the outdoor unit.
Identification and function of protective devices, thermistors, and sensors in the system.
General overview of the system's control logic and operational flow.
Control to prevent indoor heat exchanger freezing by adjusting compressor capacity.
Detection methods and troubleshooting for refrigerant gas shortage.
Ensures appropriate compressor oil level and dilution at startup.
Ensures proper operation of the 4-way valve and its security.
Procedure to collect refrigerant in the receiver by pressing the pump-down button.
Controls to prevent abnormal high pressure and freezing of indoor heat exchanger.
Refrigerant flow during the defrost operation cycle.
Detailed explanation of buttons and functions on the wireless remote controller.
Detailed explanation of buttons and functions on the wireless remote controller.
Procedure for performing an initial operating test of the system.
Procedure for operating the pump down function to collect refrigerant.
Diagnosing indoor unit issues based on the operation lamp status.
Diagnosing indoor unit issues based on the operation lamp status.
Using the service check function on the remote controller for diagnostics.
Interpreting error codes displayed on the remote controller.
General troubleshooting steps for indoor unit issues.
How to use the inspection/test button for SkyAir unit diagnostics.
How to use the inspection/test button for SkyAir unit diagnostics.
Using the wired remote controller for self-diagnosis.
Diagnosing faults using the wireless remote controller.
Troubleshooting indoor unit issues based on LED indicators.
Interpreting remote controller display and LED indicators for troubleshooting.
Troubleshooting steps when the unit runs but does not cool or heat the room.
Troubleshooting steps when the unit runs but does not cool or heat the room.
Detailed troubleshooting procedures for outdoor unit related issues.
Procedure for safely removing the compressor from the outdoor unit.
Steps for safely removing the 4-way valve assembly.
Guidelines for correct installation of outdoor and BP units, including service space requirements.
Precautions and steps for electric wiring connection to outdoor and BP units.
Precautions and steps for electric wiring connection to the outdoor unit.
To Next Page
General