SiENBE12-713 Instruction
System Configuration 193
2.2.6 POWERFUL Operation
NOTES
POWERFUL operation quickly maximizes the cooling (heating) effect in
any operation mode. You can get the maximum capacity
"
To start POWERFUL operation
1. Press “POWERFUL button”.
• POWERFUL operation ends in
20 minutes. Then the system
automatically operates again with the
settings which were used before
POWERFUL operation.
• When using POWERFUL operation,
there are some functions which are not
available.
• “ ” is displayed on the LCD.
"
To cancel POWERFUL operation
2. Press “POWERFUL button” again.
• “ ” disappears from the LCD.
"
Notes on POWERFUL operation
• POWERFUL Operation cannot be used together with ECONO or QUIET Operation.
Priority is given to the function of whichever button is pressed last.
• POWERFUL Operation can only be set when the unit is running. Pressing the operation stop button causes the settings
to be canceled, and the “ ” disappears fromthe LCD.
• In COOL and HEAT mode
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased and the air flow rate be fixed to
the maximum setting. The temperature and air flow settings are not variable.
• In DRY mode
The temperature setting is lowered by 2.5°C and the air flow rate is slightly increased.
• In FAN mode
The air flow rate is fixed to the maximum setting.
• When using priority-room setting
See “Note for multi system”.
1, 2
To Next Page
Loading...
