Daikin FTKS25D3VMW - Page 324

SiENBE12-713 Outdoor Unit
Removal Procedure 313
3. Remove the liquid/gas
pipe thermistor
" Meet the edge of the
thermistor and clip.
" The number of ports is
different according to the
models.
1
Open the putty and
remove the liquid pipe
thermistor.
[S90] : Outdoor air
thermistor
Heat exchanger
thermistor
Discharge pipe
thermistor
[S92] : Gas pipe
thermistor
Room A (Black)
Room B (Gray)
Room C (Brown)
Room D (Red)
[S93] : Liquid pipe
thermistor
Room A (Black)
Room B (Gray)
Room C (Yellow)
Room D (Blue)
2
Open the putty and
remove the gas pipe
thermistor.
4. Remove the heat
exchanger thermistor
1
Remove the heat
exchanger thermistor.
Step
Procedure Points
Clip