Daikin FTKS25LVMA - Page 10

Removal of Horizontal Blades / Vertical Blades Si041137
8 Removal Procedure
2. Remove the horizontal
blade (small).
1
Unfasten the center
shaft while bending the
horizontal blade (small)
slightly.
2
Unfasten the left shaft.
3
Unfasten the right shaft.

There is a key alignment at
the right shaft. When
reassembling, insert the right
shaft first while turning.

After inserting the right shaft,
first mount the horizontal
blade to the center shaft,
and then to the left shaft.
3. Remove the fan guard.

Some models have no fan
guard.
1
Unfasten the hooks at
the lower part of the fan
guard with a flat
screwdriver.
Step
Procedure Points
(R13493)
Horizontal blade (small)
(R13494)
(R13495)
Key alignment
(R13751)