9
Preparation before Operation
To set the batteries
2
3
1
Position and
correctly!
+
–
1. Slide the front cover to take it o.
2. Set 2 dry batteries AAA.LR03 (alkaline).
3. Set the front cover as before.
To x the remote controller holder on the wall
Remote
controller holder
Remote controller
Screws
1. Choose a place from where the signals
reach the unit.
2. Fix the holder to a wall, a pillar, etc. with the
screws supplied with the holder.
3. Place the remote controller in the remote
controller holder.
NOTE
Notes on batteries
• Whenreplacingthebatteries,usebatteriesofthesametype,andreplacethe2oldbatteriestogether.
• Whenthesystemisnotusedforalongtime,takethebatteriesout.
• Thebatterieswilllastforapprox.1year.Iftheremotecontrollerdisplaybeginstofadeandthedegradationofreceptionperformanceoccurs
withinayear,however,replaceboth2batterieswithnew,sizeAAA.LR03(alkaline).
• Theattachedbatteriesareprovidedfortheinitialuseofthesystem.
Theusableperiodofthebatteriesmaybeshortdependingonthemanufactureddateoftheairconditioner.
Notes on remote controller
• Neverexposetheremotecontrollertodirectsunlight.
• Dustonthesignaltransmitterorreceiverwillreducethesensitivity.Wipeodustwithsoftcloth.
• Signalcommunicationmaybedisabledifanelectronic-starter-typeuorescentlamp(suchasinverter-typelamps)isintheroom.Consult
theshopifthatisthecase.
• Iftheremotecontrollersignalshappentooperateanotherappliance,movethatappliancetosomewhereelse,orconsulttheserviceshop.
01_EN_3P291209-1C.indd 9 31-Aug-20 6:29:42 PM