EasyManua.ls Logo

Daikin FTKS35GVMV - User Manual

Daikin FTKS35GVMV
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
2.0/2.5/3.5 kW Class
9000/13000 Btu/h Class
Si041251EC
Question and Answer IconNeed help?

Do you have a question about the Daikin FTKS35GVMV and is the answer not in the manual?

Daikin FTKS35GVMV Specifications

General IconGeneral
Cooling Capacity3.5 kW
Heating Capacity4.0 kW
Power Supply220-240V, 50Hz
RefrigerantR32
Noise Level (Outdoor Unit)48 dB(A)
TypeSplit System Air Conditioner

Summary

Air Filters Removal

Remove Air Filters

Open front panel and pull out air filter downward.

Remove Photocatalytic Filters

Unfasten projections and remove filter from frame.

Front Panel Removal

Open Front Panel

Open the front panel over the position where it stops.

Release Rotary Shafts

Slide and release the left and right rotary shafts.

Front Grille Removal

Remove Screw Covers and Screws

Open horizontal blades before removing screw covers and screws.

Remove Front Grille

Pull out upper part, lift lower part, and remove front grille.

Horizontal Blade Removal

Remove Horizontal Blades

Unfasten shafts and remove horizontal blades.

Vertical Blade Assembly Removal

Remove Vertical Blade ASSYS

Unfasten hooks and remove vertical blade assemblies.

Electrical Box Removal

Wire Fixture and Terminal Board

Remove wire fixture screw and terminal board screws.

Disconnect Connectors and Drip Proof Plate

Disconnect connectors [S6], [S7] and remove drip proof plate.

Electrical Box Component Removal

PCBs Removal

Terminal Board and Signal Receiver Removal

PCB Component Removal

Display and Control PCB Removal

Fan Motor Removal

Fan Motor and Rotor Installation

Indoor Heat Exchanger Removal

Related product manuals