Instruction SiENBE12-713
172 System Configuration
Care and Cleaning
FDK(X)S 50/60 C, FDK(X)S 25/35 E
CAUTION
• Only a qualified service person is allowed to perform maintenance.
• Before cleaning, be sure to stop the operation and turn the breaker OFF.
"
Cleaning the air filter
1. Removing the air filter.
•Rear suction
Pull the bottom side of the air filter backwards, over the bends. (2 bends for 25/35 type, 3 bends
for 50/60 type)
• Bottom suction
Pull the filter over the bends (2 bends for 25/35 type, 3 bends for 50/60 type) situated at the
backside of the unit.
2. Cleaning the air filter.
• Remove dust from the air filter using a
vacuum cleaner and gently rinse them in
cool water. Do not use detergent or hot
water to avoid filter shrinking or
deformation. After cleaning dry them in the
shade.
3. Replacing the air filter.
•Rear suction
Hook the filter behind the flap situated at the top of the unit and push the other side gently over
the bends. (2 bends for 25/35 type, 3 bends for 50/60 type)
• Bottom suction
Hook the filter behind the flap situated at the middle of the unit and push the other side gently
over the bends. (2 bends for 25/35 type, 3 bends for 50/60 type)
Attach the filter to the
main unit while pushing
down on the bends. (2
bends for 25/35 type, 3
bends for 50/60 type)
In case of back side
In case of bottom side
Main unit
Filter
Force
Force
To Next Page
Loading...
