Si041352ED Air Filters / Front Panel
Removal Procedure 3
3. Remove the front panel.
1 Open the front panel
over the position where
it stops.
2 Slide the left shaft to the
right and release it.
î
When reassembling the front
panel, fit the right and left
shafts one by one into the
grooves and fully push them
into position.
3 Remove the right shaft
in the same way.
4 Remove the front panel.
Step Procedure Points
(R9479)
Front Panel
(R24474)
Left shaft
(R24475)
Right shaft
(R9482)