EasyManua.ls Logo

Daikin FTKS71HVM - User Manual

Daikin FTKS71HVM
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
6.0/7.0/7.1/8.0/8.5/9.0/9.5 kW Class
28000/30000/32000/33000/36000 Btu/h Class
Si041352ED
Question and Answer IconNeed help?

Do you have a question about the Daikin FTKS71HVM and is the answer not in the manual?

Daikin FTKS71HVM Specifications

General IconGeneral
BrandDaikin
ModelFTKS71HVM
CategoryAir Conditioner
LanguageEnglish

Summary

Daikin Indoor Unit Removal Procedure

Air Filters and Front Panel Removal

Detaching the Front Panel

Detailed steps for releasing shafts and removing the front panel.

Front Grille Removal

Releasing Grille Fixtures and Hooks

Instructions to unfasten grille fixtures and top hooks for removal.

Electrical Box Removal

Removing Drip Proof Plate and Earth Wire

Steps to remove the drip proof plate and disconnect the earth/ground wire.

Disconnecting Thermistor and Wire Fixture

Procedure to remove the indoor heat exchanger thermistor and wire fixture.

Disconnecting Connectors and Removing Box

Final steps to disconnect connectors and lift the electrical box from the bottom frame.

PCB Removal

Removing Control PCB and Sensor PCB

Steps to remove control PCB and intelligent eye sensor PCB by unfastening hooks.

Removing Display and Control PCBs

Procedure for removing the display PCB and the control PCB.

Swing Motors Removal

Fan Motor Removal (Without Heat Exchanger)

Indoor Heat Exchanger Removal

Disconnecting Drain Hose and Piping

Steps to disconnect the drain hose and unscrew gas/liquid piping.

Lifting and Removing Indoor Heat Exchanger

Final step to lift and remove the indoor heat exchanger unit.

Fan Motor and Fan Rotor Removal

Loosening Fan Rotor Screw and Removing Motor;Rotor

Procedure to loosen fan rotor screw and remove fan motor and rotor.

Related product manuals