Daikin FTKS71HVMG - Electrical Box and Harness Disconnection

Si04-958 Removal of Electrical Box
Removal Procedure 9
3. Release the earth /
ground wire and the
indoor heat exchanger
thermistor.
1
Remove the screw and
release the earth /
ground wire.
2
Pull out the indoor heat
exchanger thermistor.

The position of the indoor
heat exchanger thermistor is
slightly different depending
on the model.

Be careful not to lose the clip
of the thermistor.
4. Remove the electrical
box.
1
Remove the screw and
remove the wire
retainer.
Remove the 4 screws
on the terminal board
and disconnect the
connecting wire.
Step
Procedure Points
1
2
3
(R18588)
Earth / ground wire
1
2
3
(R9498)
Indoor heat exchanger thermistor
Clip
(R11268)
1
2
3
(R17230)
Terminal board
Wire
retainer
Connecting wire