Daikin FTKS71HVMG - Removal of Pcbs

Removal of PCBs Si04-958
12 Removal Procedure
4. Removal of PCBs
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
1. Remove the signal
receiver PCB.
1
Unfasten the hooks of
the shield plate.
2
Open the shield plate.

The shield plate has 2 hooks
at the lower part also.
3
Remove the shield
plate.
(R9506)
Shield
plate
(R9507)
(R9508)
Hook
(R9509)