Daikin FTKS71HVMG - Page 27

Si04-958 Removal of Horizontal Blades / Swing Motors
Removal Procedure 25
4
Remove the 2 pivots.
5
Remove the swing
motors. Caution
When reassembling, do not
confuse the installing order of
the 2 motors and the colors of
the connectors.
If you set the connectors or
motors opposite, the
horizontal blades do not
move smoothly or the noise
may be heard.
(1) Set the swing motor for the
upper blade first.
(connector: white)
(2) Then, set the swing motor
for the lower blade.
(connector: red)
(3) Fix both the swing motors
with a screw.
6
Disconnect the
connector to remove
the swing motor.
Step
Procedure Points
(R9549)
(R9550)
Swing motor (lower blade)
Swing motor (upper blade)
(R9551)