Daikin FTKS85HVM - Page 30

Fan Motor / Fan Rotor Si041352ED
28 Removal Procedure
4 Loosen the screw of the
fan rotor.
5 Remove the fan motor.

When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm
(0.2 inch) of play between
the side face of the rotor and
the bottom frame.
(1) Insert the fan motor allowing
for approx. 5 mm (0.2 inch)
of play.
(2) Tighten the fan rotor screw
until it stops. Then give the
screw one more turn.
(3) If the fan rotor rotates
appropriately, tighten the
screw completely.
(4) If not, repeat the procedure
from (1).
6 Remove the fan rotor.
Step Procedure Points
Fan rotor
(R9648)
(R9583)
Fan motor
5 mm (0.2 inch)
Side face of rotor
(R18879)
Side face of
bottom frame
(R9582)
(R9584)