Need help?Do you have a question about the Daikin FTNE15MV14 and is the answer not in the manual?
General| Type | Split System Air Conditioner |
|---|---|
| Cooling Capacity | 1.5 Ton |
| Refrigerant | R-32 |
| Weight (Indoor Unit) | 8 kg |
| Power Supply | 230V/50Hz |
Essential safety instructions to prevent personal injury, electric shock, and fire hazards.
Detailed identification and labeling of all components of the indoor unit.
Steps for setting up the unit and remote control for initial use.
How to start, stop, and change temperature settings for DRY, COOL, and FAN modes.
Instructions for adjusting the fan speed in COOL or FAN modes.
Guide to adjusting horizontal flaps and vertical louvers for comfort.
How to activate and cancel the POWERFUL or POWER CHILL modes for enhanced cooling.
Using OFF TIMER and ON TIMER functions for automatic operation scheduling.
Instructions for cleaning the indoor unit, outdoor unit, and remote control.
Procedures for opening the front panel, removing, cleaning, and replacing air filters.
Common issues, their explanations, and troubleshooting steps for the air conditioner.
Conditions requiring immediate professional service and safety warnings.
Critical safety instructions for correct and safe installation.
List of included accessories for indoor and outdoor unit installation.
Recommendations for selecting optimal installation locations for indoor and outdoor units.
Practical advice and steps for installing the front panel and front grille.
Diagrams and specifications for installing the FTNE15/20/25 indoor and outdoor units.
Instructions for mounting the indoor unit's support plate.
Process for drilling wall holes and installing embedded pipes for refrigerant lines.
Steps for connecting the indoor unit to the mounting plate and passing pipes.
Instructions for routing refrigerant pipes and drain hoses for left-side installations.
Wiring instructions for connecting indoor and outdoor units, including safety precautions.
Guidance on connecting the drain hose and checking for proper drainage.
Instructions for installing the outdoor unit, including pipe flaring and refrigerant piping.
Precautions for handling refrigerant pipes, including protection and bending.
Material selection guidelines for copper pipes and thermal insulation.
Procedure for purging air and checking for refrigerant leaks using a vacuum pump.
Instructions for inter-unit wiring connections and electrical safety.
Instructions for drain work, including checking drainage flow.
Procedure for performing trial operation and testing the unit's functions.
Checklist for verifying proper installation and operation of the air conditioner.
To Next Page
