EasyManua.ls Logo

Daikin FTNE35MV1V9 User Manual

Daikin FTNE35MV1V9
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
2.0/2.5/3.5 kW Class
9000/13000 Btu/h Class
Si041251EC
Question and Answer IconNeed help?

Do you have a question about the Daikin FTNE35MV1V9 and is the answer not in the manual?

Daikin FTNE35MV1V9 Specifications

General IconGeneral
Cooling Capacity3.5 kW
Power Supply220-240V/50Hz/1Ph
Indoor Unit Dimensions (W x H x D)770 x 285 x 223 mm
Outdoor Unit Dimensions (W x H x D)658 x 550 x 275 mm
RefrigerantR32

Summary

Air Filters Removal

Remove Air Filters

Procedure to remove the standard air filters from the indoor unit.

Remove Photocatalytic Filters

Steps to remove Titanium apatite photocatalytic air-purifying filters.

Horizontal and Vertical Blade ASSYs Removal

Remove Horizontal Blades

Steps to unfasten shafts and remove horizontal blades.

Remove Vertical Blade ASSYS

Unfastening hooks and removing vertical blade ASSYs.

Electrical Box Removal

Lift and Remove Electrical Box

Unfastening hooks and lifting out the electrical box.

PCBs Removal

Remove Signal Receiver PCB

Disconnecting connector and removing signal receiver PCB.

Drain Pan Unit and Swing Motor Removal

Remove Drain Pan Unit

Removing screws, twisting, and pulling out the drain pan unit.

Remove Swing Motor

Removing the screw and pulling out the swing motor.

Remove Crank Assembly

Removing screw and unfastening hook for crank assembly.

Fan Motor Removal

Indoor Heat Exchanger Removal

Disconnect Pipings

Disconnecting refrigerant pipings, caution advised.

Lift and Remove Heat Exchanger

Lifting and removing the indoor heat exchanger.

Fan Rotor Removal

Remove Fan Motor

Unfastening hooks and removing the fan motor.

Related product manuals