EasyManua.ls Logo

Daikin FTNE35LV1 User Manual

Daikin FTNE35LV1
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
2.0/2.5/3.5 kW Class
9000/13000 Btu/h Class
Si041251EC
Question and Answer IconNeed help?

Do you have a question about the Daikin FTNE35LV1 and is the answer not in the manual?

Daikin FTNE35LV1 Specifications

General IconGeneral
Cooling Capacity3.5 kW
Energy Efficiency Ratio (EER)3.21
Power Supply220-240V, 50Hz
Indoor Unit Weight9 kg
TypeSplit Air Conditioner
RefrigerantR410A
Outdoor Unit Dimensions (WxHxD)658 x 550 x 275 mm

Summary

Air Filters

Electrical Box Servicing

Wire Fixture, Terminal Board, and Wires

Steps to remove wire fixture, terminal board, and disconnect wires.

Electrical Box and Fan Motor Connector

Steps to remove the electrical box, unfasten hooks, and disconnect the fan motor.

Printed Circuit Boards (PCBs)

Signal Receiver and INTELLIGENT EYE PCBs

Steps to remove signal receiver and INTELLIGENT EYE sensor PCBs.

Display and Control PCBs

Steps to detach the display and control PCBs from the unit.

Drain Pan and Swing Motor

Fan Motor Replacement

Fan Motor Detachment

Procedure to detach and remove the fan motor.

Indoor Heat Exchanger Service

Screws and Piping Disconnection

Steps to remove fixing screws and disconnect refrigerant pipings.

Heat Exchanger Removal

Steps to unfasten hooks and lift out the indoor heat exchanger.

Fan Rotor Service

Fan Motor and Rotor Detachment

Procedure to detach the fan motor and fan rotor.

Related product manuals