Need help?Do you have a question about the Daikin FTNE25LV1 and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R-32 |
| Indoor Unit Dimensions (W x H x D) | 800 x 290 x 215 mm |
| Outdoor Unit Dimensions (W x H x D) | 770 x 540 x 290 mm |
| Weight (Indoor Unit) | 9 kg |
| Indoor Unit Weight | 9 kg |
| Type | Split System Air Conditioner |
Procedure for removing the standard air filters from the indoor unit.
Instructions for opening the front panel and releasing rotary shafts.
Steps to remove screw covers and screws securing the front grille.
Steps for removing horizontal blades by unfastening shafts.
Steps to remove the wire fixture screw and terminal board screws.
Procedure for disconnecting S6 (swing motor) and S7 (AC fan motor) connectors.
Steps to remove the box, lift, and disconnect the S1 (fan motor) connector.
Steps to remove the screw, twist, and detach the drain pan unit.
Procedure to remove the screw and pull out the swing motor.
Steps to remove the fan motor from the unit.
Steps to remove screws fixing the heat exchanger to the installation plate.
Procedure for disconnecting the refrigerant pipings and drain hose.
Final steps to remove the indoor heat exchanger by releasing right side hooks.
Steps to loosen the screw and remove the fan motor and fan rotor.
To Next Page
