Daikin FTX35J2V1B - User Manual

Other manuals for Daikin FTX35J2V1B

Service Manual267 pages

Installation Manual18 pages

Questions and Answers

M
Matthew HillAug 3, 2025
Why my Daikin FTX35J2V1B does not operate?
- P
  Patrick BoothAug 3, 2025
  If your Daikin Air Conditioner isn't turning on and the OPERATION lamp is off, there are several things to check: * **Breaker/Fuse:** Verify that a breaker hasn't been turned OFF or a fuse hasn't blown. * **Power Failure:** Check for a power failure in your area. * **Remote Batteries:** Ensure batteries are properly installed in the remote controller. * **Timer Setting:** Make sure the timer is correctly set.
R
Rebecca NorrisAug 8, 2025
Why is the cooling effect poor in my Daikin Air Conditioner?
- C
  Courtney OsbornAug 8, 2025
  If your Daikin Air Conditioner isn't cooling or heating effectively, consider the following: * **Air Filters:** Check if the air filters are clean. * **Blockages:** Ensure nothing is blocking the air inlet or outlet of the indoor and outdoor units. * **Temperature Setting:** Verify that the temperature setting is appropriate. * **Windows and Doors:** Confirm that all windows and doors are closed. * **Airflow:** Check that the airflow rate and air direction are set appropriately.
D
dan26Aug 12, 2025
What to do if Daikin FTX35J2V1B Air Conditioner operation stops suddenly?
- M
  Mrs. Laurie FergusonAug 12, 2025
  If your Daikin Air Conditioner suddenly stops and the OPERATION lamp flashes, the following could be the reason: * **Air Filters:** Check if the air filters are clean. * **Blockages:** Ensure nothing is blocking the air inlet or outlet of the indoor and outdoor units. To resolve this, clean the air filters, remove any obstacles, turn the breaker OFF, and then turn it back ON. After that, try operating the air conditioner with the remote controller.
R
Ryan BishopAug 16, 2025
What to do if Daikin Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
- P
  pkennedyAug 16, 2025
  If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, clean the air filters or remove any obstacles. Then, turn the breaker OFF, and then turn it ON again. Try operating the air conditioner with the remote controller.
P
plopezAug 21, 2025
How to fix Daikin FTX35J2V1B remote controller when no signals are displayed?
- K
  ksingletonAug 21, 2025
  If your Daikin Air Conditioner remote controller isn't displaying any signals, it's likely due to dying batteries or a malfunctioning remote controller. Replace all the batteries with new size AAA alkaline batteries. If there is a reset button, press it after replacing the batteries.
M
Margaret JacobsAug 26, 2025
What to do if Daikin Air Conditioner heating stops suddenly with flowing sound?
- W
  wcardenasAug 26, 2025
  If the heating operation of your Daikin Air Conditioner stops suddenly and you hear a flowing sound, you should wait for about 3 to 8 minutes.
S
Shelly KerrAug 29, 2025
What to do if Daikin FTX35J2V1B has abnormal functioning?
- R
  Rachel HolmesAug 29, 2025
  If your Daikin Air Conditioner is malfunctioning during operation, it might be due to interference from lightning or radio waves. Try turning the breaker OFF, then turn it back ON, and attempt to operate the air conditioner with the remote controller.