What to do if Daikin FTX35J3V1B Air Conditioner operation stops suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is flashing, clean the air filters or remove any obstacles. Then, turn the breaker OFF, and then turn it ON again. Try operating the air conditioner with the remote controller.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
Covers essential warnings, cautions, and general safety instructions for unit operation.
Details on proper earthing, leakage breakers, and electrical shock prevention.
How to start, stop, and adjust temperature settings for various operation modes.
Explains common cases that appear as troubles but have valid reasons.
Guides users to check common issues like non-operation or poor cooling before calling for service.
Instructions on when to call for service and critical warnings for safety.
How to enter the fault diagnosis mode using the remote controller.
Explanation of fault codes displayed on the remote controller for diagnosing issues.
To Next Page
