What to do if my Daikin FTX35JVEA9 stops suddenly and the operation lamp blinks?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is blinking, clean the air filters or remove any obstructions. Then, turn the breaker OFF, and turn it back ON. Try operating the air conditioner with the remote controller after that.
How to get rid of odour from Daikin FTX35JVEA9 indoor unit?
If the indoor unit of your Daikin Air Conditioner is emitting an odor, it is recommended to have the indoor unit cleaned by a technician.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Type | Split System |
| Power Supply | 220-240V / 50Hz |
| Refrigerant | R32 |
| Energy Efficiency Ratio (Cooling) | 3.21 |
Essential safety guidelines for operation, repair, and handling.
Crucial safety warnings and precautions to follow during repair procedures.
Important safety considerations for handling the product post-repair.
Procedures and checks to ensure safety and functionality post-repair.
Explanation and meaning of icons used throughout the manual for clarity.
Details general functions applicable to various models.
Details specific functions for models sold in China.
Details specific functions for models sold in Taiwan.
Details specific functions for models sold in Europe.
Details functions for models in Singapore, Malaysia, and Indonesia.
Details specific functions for models sold in Australia.
Additional function details for European models.
Technical specifications for outdoor units, including cooling and heat pump models.
Technical specifications for Branch Pipe (BP) units.
Technical specifications for general indoor units.
Technical specifications for indoor units sold in China.
Technical specifications for indoor units sold in Taiwan.
Technical specifications for indoor units sold in Europe.
Wiring diagram and connector names for Branch Provider Units BPMK928B42, B43.
Wiring diagrams and connector names for various outdoor units.
Wiring diagrams and connector names for FTK/FTX/FTXD/FVX series.
Wiring diagrams and connector names for FTK/FTKD/FTX/FTXD series.
Wiring diagrams and connector names for CDX/CDK HAV series.
Wiring diagrams and connector names for FLK/FLX HV/JV series.
Wiring diagrams and connector names for FHYC KV series.
Wiring diagrams and connector names for FDYM series.
Key operational features and functions for split type indoor units.
Details flap, louver, auto-swing, and fan speed controls.
Covers special modes like pre-heat, program dry, auto, and night set.
Covers self-diagnosis, auto-restart, and freeze protection functions.
Overview of outdoor unit's refrigerant system and major components.
Details protection devices for outdoor and BP units.
Explains key system control logic and operations.
Process and conditions for defrosting the outdoor heat exchanger.
Controls for adjusting cooling and heating capacity.
Detection and handling of gas shortage issues.
Controls frequency limit based on input current and high pressure.
Manages fan speed to prevent abnormal operation and ensure reliability.
Details control of outdoor unit motorized valves.
Ensures proper operation and security of the 4-way valve.
Refrigerant flow during standby for cooling and heating modes.
Refrigerant flow during equalizing control in cooling and heating.
Refrigerant flow during oil return in cooling and heating modes.
Refrigerant flow path during defrost operation.
Refrigerant flow for all-room heating operation.
Information on operating the remote controller.
Details on operating various wireless remote controller models.
Details on operating wired remote controller models.
Steps for performing trial operation and initial checks.
Detailed steps for conducting the operating test.
Explanation of the test operation switch (SW7).
Procedure for pump down operation.
Procedures for setting unit parameters in the field.
Steps for setting parameters via wired and wireless remote controllers.
Procedure for setting group numbers for central remote control.
Important precautions for RMK/RMX140J outdoor unit users.
Diagnosing issues specific to split type indoor units.
Using the operation lamp to identify indoor unit faults.
Interpreting error codes displayed on the remote controller.
Detailed steps for troubleshooting specific indoor unit faults.
Diagnosing issues specific to SkyAir indoor units.
Using the inspection/test button for SkyAir unit diagnostics.
Performing self-diagnosis with a wired remote controller.
Diagnosing faults using a wireless remote controller.
Troubleshooting using remote controller display and LED indicators.
Diagnosing issues related to the outdoor unit.
Troubleshooting when the unit runs but fails to cool or heat.
Detailed troubleshooting steps for outdoor unit issues.
Troubleshooting specific to BP units.
Interpreting diagnostic LEDs on the Branch Provider Unit.
Removal procedures for BPMK928B42/43 unit components.
Steps to access and remove the electrical box and PCB mount.
Procedure for removing motorized valves.
Procedures for removing major outdoor unit parts.
Steps to remove outer panels and electrical box.
Procedure for removing propeller fans and fan motors.
Steps to remove motorized valves.
Steps for removing the compressor.
Procedure for removing the 4-way valve.
Guidelines for installing outdoor and BP units correctly.
Procedures and service space requirements for outdoor unit installation.
Installation procedures for the BP Unit.
Information on wiring connections for outdoor and BP units.
Precautions for electric wiring connection of the outdoor unit.
How to set the rotary switches on the outdoor unit.
Procedure for trial operation using the remote controller for heat pump models.
Diagrams showing refrigerant piping layouts for various units.
Piping diagrams for different outdoor unit models.
Piping diagrams for BP units.
Piping diagrams for various indoor unit types.
Diagrams illustrating electrical wiring connections.
Wiring diagrams for outdoor units.
Wiring diagrams for BP units.
Wiring diagrams for indoor units.
To Next Page