Daikin FTXA25B2V1BB - Brightness of the Indoor Unit Display; To Set the Brightness of the Indoor Unit Display; To Turn on the Power Supply; To Change Indoor Unit Position Setting

4 | Before operation
User reference guide
16
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
5 Press .
Result: Setting is complete. blinks.
4.5 Brightness of the indoor unit display
Adjust the brightness of the indoor unit display as desired, or turn OFF the display.
4.5.1 To set the brightness of the indoor unit display
1 Press for at least 2seconds.
Result: The menu appears on the display. is blinking.
2 Press .
3 Press or to change the setting as follows:
…is blinking Brightness is…
High
Low
Off
4 To confirm the selected setting, press .
Result: The brightness setting is changed.
Note: The display automatically returns to the default screen after 60seconds. To
return to the default screen sooner, press twice.
4.6 To turn on the power supply
1 Turn the circuit breaker on.
Result: The flap of the indoor unit will open and close to set the reference position.
4.7 To change indoor unit position setting
Set the indoor unit position to avoid direct airflow to walls.
1 Press for at least 2seconds.
Result: The menu appears on the display.