Daikin FTXA25B2V1BB - To Remove the Front Panel; To Take Following Items into Account before a Long Idle Period

7 | Maintenance and service
User reference guide
44
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
7.10 To remove the front panel
INFORMATION
Remove the front panel only in case it MUST be replaced.
1 Open the front panel. See "7.4To open the front panel"[441].
2 Open the panel locks located on the back side of the panel (1on each side).
a a
a Panel lock
3 Push the right arm lightly to the right to disconnect the shaft from the shaft
slot on the right side.
a
c
b
a Arm
b Shaft
c Shaft slot
4 Disconnect the front panel shaft from the shaft slot on the left side.
a
c
b
a Arm
b Shaft slot
c Shaft
5 Remove the front panel.
6 To re-install the front panel perform the steps in the opposite order.
7.11 To take following items into account before a long idle period
Operate the unit several hours in fan only mode to dry the inside of the unit.
1 Press and select operation.
2 Press and start operation.