Daikin FTXA25B2V1BB - Page 34

5 | Operation
User reference guide
34
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518786-1F – 2020.05
To connect the wireless adapter to your device directly
1 Hold for at least 5seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly or until the AP mode display (menu ) appears.
3 Press to confirm the selection.
Result: is blinking. The operation and timer LEDs are blinking alternately.
4 Connect your smart device to the access point in the same way as to a
standard wireless network.
5 Enter the SSID number and password located on the unit or in the accessory
set.
6 Press to exit the menu.
Result: The display will return to the default screen.
To connect the wireless adapter to your home network
The wireless adapter can be connected to your home network using the:
▪ WPS button on the router (if present),
▪ SSID and KEY number located on the unit.
To connect using the WPS button
1 Hold for at least 5seconds in the default screen.
Result: The confirmation display (menu ) appears.
2 Press repeatedly or until the WPS setting display (menu ) appears.
3 Press to confirm the selection.
Result: is blinking. The timer LED is blinking.
4 Press the WPS button on your communication device (e.g. router) within
approximately 1minute. Refer to the manual of your communication device.
INFORMATION
If the connection with your router is not possible, try procedure "To connect using
SSID and KEY number"[435].