Daikin FTXF20TVMA - Basic Operation; AUTO · COOL · DRY · HEAT · FAN ONLY Operation

9
AUTO · COOL · DRY · HEAT · FAN ONLY
Operation
NOTE
Notes on AUTO operation
• InAUTOoperation,thesystemselectsanappropriateoperationmode(COOLorHEAT)basedontheindoorstartstheoperation.
• Thesystemautomaticallyreselectssettingataregularintervaltobringtheindoortemperaturetouser-settinglevel.
Note on DRY operation
• Eliminateshumiditywhilemaintainingtheindoortemperatureasmuchaspossible.Itautomaticallycontrolstemperatureandairowrate,
somanualadjustmentofthesefunctionsisunavailable.
Theairconditioneroperateswiththeoperationmodeofyourchoice.
 To start operation
Press button of your desired operation mode.
AUTO operation
Press . “ ” appears on the LCD.
COOL operation
Press . “ ” appears on the LCD.
DRY operation
Press . “ ” appears on the LCD.
HEAT operation
Press . “ ” appears on the LCD.
FAN ONLY operation
Press . “ ” appears on the LCD.
•TheOPERATIONlamplightsgreen.
Display
 To stop operation
Press
.
•TheOPERATIONlampgoesoff.
 To change the temperature setting
Press
.
•Press toraisethetemperatureandpress tolowerthetemperature.
Eachpressingofthebuttonchangesthetemperatureby0.5°C.
COOL operation HEAT operation AUTO operation DRY or FAN ONLY operation
18.0-32.0°C 10.0-30.0°C 18.0-30.0°C
Thetemperaturesettingcannotbe
changed.
Basic Operation Basic Operation
01_EN_3P372379-11R.indd 9 22-Feb-19 1:17:01 PM