How to fix abnormal functioning during Daikin Air Conditioner operation?
If you experience abnormal functioning during the operation of your Daikin Air Conditioner, try turning the breaker OFF, then turn it back ON. After that, attempt to operate the air conditioner again using the remote controller.
What to do if my Daikin Air Conditioner operation stopped suddenly?
If your Daikin Air Conditioner operation stopped suddenly, but the OPERATION lamp is still on, it will automatically resume operation in about 3 minutes.
Why is my Daikin Air Conditioner cooling (heating) effect poor?
If the cooling or heating effect of your Daikin Air Conditioner is poor, check the following: Ensure the air filters are clean. Make sure nothing is blocking the air inlet or outlet of either the indoor or outdoor units. Verify the temperature setting is correct. Confirm that windows and doors are closed. Check the air flow rate and air direction. Finally, see if the unit is set to INTELLIGENT EYE mode.
Why is the cooling/heating effect poor on my Daikin Air Conditioner?
A poor cooling or heating effect in your Daikin Air Conditioner could be due to several reasons. Check that the air filters are clean and that nothing is blocking the air inlet or outlet. Ensure the temperature setting is appropriate, all windows and doors are closed, and the airflow rate and direction are correctly set. Also, verify if the unit is set to INTELLIGENT EYE mode.
What to do if my Daikin FTXG25EV1BW indoor unit smells?
If your Daikin Air Conditioner's indoor unit emits an odor, it is recommended to have the indoor unit professionally cleaned by a technician.
Why does my Daikin FTXG25EV1BW indoor unit gives out odour?
If the indoor unit of your Daikin Air Conditioner is emitting an odor, it is recommended to have the indoor unit cleaned by a technician.
Why does hot air not flow out soon after I start heating operation on my Daikin Air Conditioner?
If hot air doesn't flow out immediately after starting the heating operation on your Daikin Air Conditioner, allow 1 to 4 minutes for it to begin.
What to do if my Daikin FTXG25EV1BW does not operate and the OPERATION lamp is off?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, first check whether a breaker has tripped or a fuse has blown. Also, verify if there has been a power failure, ensure the batteries are correctly installed in the remote controller, and confirm that the timer setting is correct.
Why don't the flaps open when my Daikin FTXG25EV1BW unit is started?
If you have a multi-system Daikin Air Conditioner, the flaps might not open if the unit starts during defrosting. In this case, the flaps will remain closed until the defrosting process is complete.
Why doesn't hot air flow out soon after starting the heating operation on my Daikin Air Conditioner?
After starting the heating operation on your Daikin Air Conditioner, you may need to wait for 1 to 4 minutes for hot air to flow out. The system is designed to start discharging air only after it has reached a certain temperature.
General| Brand | Daikin |
|---|---|
| Model | FTXG25EV1BW |
| Category | Air Conditioner |
| Language | English |
Overview of all available functions for cooling and heat pump models.
Detailed list of functions available for cooling-only models.
Detailed list of functions available for heat pump models.
General overview of product specifications.
Technical specifications for indoor units in cooling-only mode.
Technical specifications for outdoor units in cooling-only mode.
Technical specifications for indoor units in heat pump mode.
Technical specifications for outdoor units in heat pump mode.
General overview of PCB wiring diagrams.
Detailed wiring diagrams for wall-mounted indoor units.
Detailed wiring diagrams for duct-connected indoor units.
Detailed wiring diagrams for floor/ceiling suspended dual indoor units.
Detailed wiring diagrams for floor-standing indoor units.
Detailed wiring diagrams for ceiling-suspended indoor units.
Detailed wiring diagrams for outdoor units.
Overview of the main operational functions and principles.
Description of the functions of key structural components.
Detailed specifications and logic for system control.
Guidance on initial setup and user operation.
Operational instructions for various Daikin series.
Essential safety warnings and precautions for users and workers.
Explanation of icons used throughout the manual.
Important warnings before starting diagnostic procedures.
Guide to identifying and resolving common operational issues.
Methods for checking system functionality and diagnosing faults.
List of error codes displayed on the remote control and their meanings.
Step-by-step troubleshooting for indoor unit issues.
Step-by-step troubleshooting for outdoor unit issues.
Detailed procedures for checking specific components and systems.
Step-by-step instructions for removing outdoor unit components.
Information on other operational aspects.
Procedure for performing a trial operation using the remote control.
Guidance on setting jumpers for dual indoor unit installations.
Diagrams illustrating refrigerant piping for various models.
Diagrams illustrating electrical wiring connections.
To Next Page
