4 | Components
Service manual
51
RXJ20~50A + FTXJ-A(W)(S)(B)
Split Emura 3 R32
ESIE22-04 – 2022.04
5 Remove the wire clamp.
6 Remove the screws that fix the right side plate assembly.
7 Cut the cable tie.
a Cable tie
b Switch box
8 Lift and remove the switch box from the outdoor unit.
9 To install the switch box, see "4.1Plate work"[448].
To install the switch box
INFORMATION
This procedure is just an example and may differ on some details for your actual unit.
1 Install the switch box on the correct location in the outdoor unit.
2 Install the right side plate assembly on the outdoor unit and fix it using the
screws.
draft–22/04/2022 08:50
To Next Page
Loading...
