Why does my Daikin FTXR28EV1B keep running after drying or cooling is stopped?
If the Daikin Air Conditioner continues to operate even after “SARARA” DRYING, DRY COOLING, or COOLING operation is stopped, the MOLD PROOF operation will start. If you don’t want it, set to “MOLD PROOF OFF” using the remote controller.
Why doesn't hot air flow out immediately from my Daikin FTXR28EV1B when heating?
If hot air does not flow out soon after starting the Daikin Air Conditioner's heating operation, the unit is likely warming up. Please wait for 1 to 4 minutes.
Why is my Daikin Air Conditioner outdoor unit emitting water or steam?
The Daikin Air Conditioner may emit water or steam during HEATING because the frost on the outdoor unit melts into water or steam when the air conditioner is in defrost operation. In COOLING operation, moisture in the air condenses into water on the cool surface of outdoor unit piping and drips.
Why does Daikin Air Conditioner indoor unit give out odor?
Odors from the room, furniture, or cigarettes might be absorbed into the unit.
What to do if Daikin FTXR28EV1B cooling or heating effect is poor?
Several factors can impact cooling or heating performance. Ensure that the air filters are clean and that nothing is blocking the air inlet or outlet of either the indoor or outdoor units. Verify that the temperature setting is appropriate, and that all windows and doors are closed. Confirm that the air flow rate and direction are correctly set and that the ventilator fan isn't spinning.
Why did my Daikin FTXR28EV1B Air Conditioner suddenly stop? (Multi-colored indicator lamp is on.)
If the Daikin Air Conditioner operation stopped suddenly and the multi-colored indicator lamp is on, it may be due to a sudden large voltage fluctuation. The unit should automatically resume operation in about 3 minutes for system protection.
What to do if Daikin FTXR28EV1B Air Conditioner is not operating and multi-colored indicator lamp flashes?
Turn off the breaker and then attempt to start the unit using the remote controller.
Identifies and describes components of the indoor unit, including sensors and indicators.
Identifies and describes components of the outdoor unit, including sensors and piping.
Details the transmitter/receiver function of the remote controller.
Explains the various displays shown on the remote controller screen.
Details the functions of various buttons on the remote controller for operation.
Instructions for installing batteries into the remote controller.
Guidance on how to operate the remote controller effectively.
Steps for mounting the remote controller holder on a wall or pillar.
Instructions for attaching air filters to the indoor unit.
Procedure for turning on the main power supply to the unit.
Provides advice on operating the air conditioner efficiently to save energy.
Details the recommended operating temperature and humidity ranges for optimal performance.
Explains how humidity capability varies with outdoor temperature and humidity.
Instructions for operating the unit in cooling mode to lower temperature.
Instructions for operating the unit in Sarara Drying mode to lower humidity.
How to adjust airflow direction and rate during cooling and drying operations.
Procedure for stopping the cooling or drying operation.
How to adjust temperature and humidity settings for cooling and drying.
Instructions for operating the unit in heating mode to raise temperature.
Instructions for operating the unit in Ururu Humidifying mode to raise humidity.
How to adjust airflow direction and rate during heating and humidifying.
Procedure for stopping the heating or humidifying operation.
How to adjust temperature and humidity settings for heating and humidifying.
How to adjust airflow direction and rate when the unit is in auto mode.
Procedure for stopping the auto operation mode.
How to adjust the temperature setting during auto operation.
How to adjust temperature settings for moisturizing operation.
How to adjust airflow direction during moisturizing operation.
Procedure for deactivating the moisturizing operation mode.
How to change the direction of airflow vertically and horizontally.
Steps to manually fix the airflow direction.
Instructions for activating and using the 3-D airflow feature.
Procedure for deactivating the 3-D airflow feature.
Explanation and use of Comfort Airflow and Cooling Breeze modes.
How to adjust the fan speed or airflow rate.
How to adjust airflow direction and rate for these functions.
How to set the duration for the home leave ventilation.
How to adjust airflow direction during home leave ventilation.
Procedure for deactivating home leave ventilation.
How to set a timer to automatically stop the unit.
How to set timers for automatically turning the unit on or off.
Procedure for canceling any set timer functions.
How to set the desired wake-up time for comfort sleep.
Procedure for deactivating the comfort sleep mode.
How to adjust airflow direction during powerful operation.
Procedure for stopping the powerful operation mode.
How to enable or disable the child lock feature for the remote controller.
How to enable or disable the mold proof operation.
How to adjust the brightness of the indoor unit display.
How to adjust the volume of the unit's beep sounds.
How to adjust the contrast of the remote controller's LCD screen.
Describes the unit's movements and indicator lights during mold proof operation.
Details when the mold proof operation runs automatically.
Instructions for manually starting and stopping mold proof operation.
Describes the unit's movements and indicator lights during mold shock out.
Procedure for stopping the mold shock out operation.
How to view indoor/outdoor temperature and humidity readings.
A summary table of parts and cleaning recommendations.
How to reset the indicator after cleaning the air filters.
Steps to open the front panel of the indoor unit.
Instructions for detaching the front panel from the unit.
Instructions for reattaching the front panel to the unit.
Instructions for detaching the upper panel of the indoor unit.
Instructions for reattaching the upper panel to the unit.
Steps to open the front panel to access the air filters.
Instructions for pulling out the air filters from the unit.
Methods for cleaning the air filters, including washing and vacuuming.
Instructions for reinstalling the air filter and closing the front panel.
How to reset the indicator after cleaning the air filters.
Instructions for removing the streamer unit and air filters.
Steps to remove the deodorizing filter for the streamer.
Instructions for pulling out the streamer unit.
Steps to remove the Titanium apatite photocatalytic air-purifying filter.
Instructions for reattaching the streamer unit and air filters.
How to clean the deodorizing and photocatalytic filters.
Detailed instructions for cleaning the streamer unit, including disassembly.
Instructions for replacing the deodorizing filter for the streamer.
Instructions for replacing the Titanium apatite photocatalytic air-purifying filter.
Steps for safely disassembling the streamer unit for cleaning or repair.
Instructions for correctly reassembling the streamer unit.
Instructions for cleaning and replacing the air supply filter.
Reasons why the unit may not start immediately after power-on or mode change.
Explanation for the delay in hot air output at the start of heating.
Descriptions of various normal operating sounds the unit may make.
Explanation for fizzing sounds during humidifying or ventilating operations.
Explanation for sounds during humidifying operation.
Reasons for noise from the indoor unit after humidifying stops.
Explanation for unit stoppage and water sounds during heating.
Explanation for water or steam emission from the outdoor unit.
Explanation for mist appearing from the indoor unit.
Reasons for odors emitted from the indoor unit.
Explanation for cold air discharge at the beginning of Sarara Drying.
Reasons for the outdoor fan rotating when the unit is not operating.
Explanation for sudden stops with the indicator lamp illuminated.
Reasons for sudden stops when an ON timer is active.
Explanation for unit operation when the indicator lamp is off.
Reasons for continued operation after stopping specific modes.
Possible cause for room lamp flickering during humidifying operation.
Checks to perform if the unit does not operate and the indicator lamp is off.
Checks to perform if the unit does not operate and the indicator lamp flashes.
Checks to perform if the unit stops suddenly with a flashing indicator lamp.
Checks to perform if the cooling or heating performance is insufficient.
Checks to perform for general abnormal functioning during operation.
Checks to perform if the front panel does not open and the lamp flashes.
Checks to perform if the indicator lamp flashes during streamer air purifying.
List of symptoms indicating a need to contact a service shop.
Explanation for indicator lamp blinking during operation, possibly indicating sensor issues.
How the unit behaves after a power failure and what to expect.
Advice on protecting the unit during lightning.
Lists error codes displayed by the remote controller and their corresponding meanings.
General| Brand | Daikin |
|---|---|
| Model | FTXR28EV1B |
| Category | Air Conditioner |
| Language | English |
To Next Page
