Si041051 Removal of Electrical Box / Vertical Blades (Pattern 1)
Removal Procedure 11
3. Remove the vertical blade
ASSY.
A vertical blade ASSY has 6
fins. It is impossible to
replace only one fin.
The vertical blade ASSY is
not marked for difference
between right and left.
1
Unfasten the hooks at
the upper 2 positions.
2
Unfasten the 3 hooks at
the shaft mounting part
by pressing them with a
flat screwdriver.
3
Remove the vertical
blade ASSY.
Repeat the same procedure
to remove the vertical blade
ASSY on the other side.
Step Procedure Points
Hook
(R8020)
Vertical blade ASSY
(R8021)
(R8022)
Hook
(R8023)
To Next Page
Loading...
