What to do if an abnormal functioning happens during Daikin FTXS20CVMB operation?
If you experience abnormal functioning during Daikin Air Conditioner operation, turn the breaker OFF, then turn it ON again. After that, try operating the air conditioner using the remote controller.
What to do if Daikin Air conditioning operation stops suddenly and the OPERATION lamp flashes?
If the Daikin air conditioning stops suddenly and the OPERATION lamp flashes, clean the air filters or remove any obstacles. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
What to do if water leaks from the indoor unit of Daikin Air conditioning?
If water leaks from the indoor unit, turn the breaker OFF and call the service shop.
Why my Daikin Air conditioning operation does not start soon?
You should wait for about 3 minutes.
Why does mist come out of the Daikin FTXS20CVMB indoor unit?
This occurs when the air in the room is cooled into mist by the cold airflow during cooling operation of the Daikin Air Conditioner.
Why does mist come out of my Daikin Air Conditioner?
This happens when the air in the room is cooled into mist by the cold air flow during cooling operation.
Why doesn't hot air come out immediately from my Daikin Air Conditioner when heating?
You should wait for 1 to 4 minutes. The system is designed to start discharging air only after it has reached a certain temperature.
Why is my Daikin Air conditioning cooling/heating effect poor?
The cooling or heating effect might be poor due to several reasons. Check if the air filters are clean. Ensure there is nothing blocking the air inlet or outlet of the indoor and outdoor units. Verify that the temperature setting is appropriate. Make sure the windows and doors are closed. Confirm that the airflow rate and direction are set correctly. Also, check if the unit is set to INTELLIGENT EYE mode.
Why is the cooling or heating effect poor in my Daikin FTXS20CVMB Air Conditioner?
If the cooling or heating effect of your Daikin Air Conditioner is poor, check whether the air filters are clean.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
Essential safety advice covering warnings, cautions, and general precautions for safe operation.
Covers installation site requirements, electrical work, system relocation, and noise considerations.
Lists and describes all the parts of the indoor unit with corresponding numbers.
Lists and describes all the parts of the outdoor unit with corresponding numbers.
Describes the signal transmitter, remote controller display, and basic operation principles.
Explains the function of various buttons on the remote controller for different operations.
Step-by-step instructions for inserting batteries into the remote controller.
Instructions on operating the remote controller and mounting its holder.
Procedures for setting the clock and turning on the main power breaker.
Recommendations for optimizing energy efficiency during operation.
How to select AUTO, DRY, COOL, HEAT, or FAN modes for operation.
Instructions on how to change the fan speed settings for different modes.
How to control the direction of airflow using the horizontal blades (flaps).
Instructions on how to manually adjust the vertical blades (louvers) for airflow direction.
How to activate and deactivate the POWERFUL operation mode for quick cooling/heating.
How to use the QUIET button to reduce outdoor unit noise.
How to record and use preferred temperature and airflow settings for convenience.
Detailed explanation of the Home Leave function's benefits and use cases.
How to enable the infrared sensor for energy-saving based on human presence.
How to adjust the sensor's detection area and its energy-saving effects.
Instructions for setting the timer to automatically turn the unit off.
How to set the timer for automatic ON operation and combine ON/OFF timers.
Guidelines for operating multiple indoor units connected to one outdoor unit.
Explanation of how priority rooms affect operation mode selection and special functions.
Procedures for cleaning the indoor unit's exterior and front panel.
Instructions for cleaning and replacing air filters and air purifying filters.
Steps to check the unit's condition before operation or before a long idle period.
Explains common cases that are not troubles and checks to perform before calling service.
Symptoms indicating the need to contact a service professional immediately.
How to use the remote controller to diagnose and display fault codes.
Explains the meaning of LED indicators on the outdoor unit PCB for troubleshooting.
General| Cooling Capacity | 2.0 kW |
|---|---|
| Cooling Capacity (BTU) | 6800 BTU |
| Heating Capacity | 2.5 kW |
| Heating Capacity (BTU) | 8500 BTU |
| Power Supply (V/Hz/Ph) | 220-240V/50Hz/1Ph |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Weight | 28 kg |
| Type | Split |
| Power Supply | 220-240V |
| Noise Level (Outdoor Unit) | 48 dB(A) |
| Refrigerant | R32 |
To Next Page
