Why is the cooling or heating effect poor on my Daikin Air Conditioner?
If the cooling or heating effect of your Daikin Air Conditioner is poor, make sure the air filters are clean. Check for any obstructions blocking the air inlet or outlet of both the indoor and outdoor units. Verify that the temperature setting is appropriate and that all windows and doors are closed. Also, ensure the airflow rate and direction are correctly set.
Why does my Daikin FTXS20DVMA Air Conditioner stop suddenly but the OPERATION lamp is on?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is on, it may be due to a sudden large voltage fluctuation for system protection. The unit will automatically resume operation in about 3 minutes.
What to do if my Daikin Air Conditioner does not operate and the OPERATION lamp is off?
If your Daikin Air Conditioner isn't operating and the OPERATION lamp is off, check whether a breaker has been turned OFF or a fuse has blown. Also, ensure it isn’t a power failure. Verify that batteries are correctly installed in the remote controller and that the timer setting is correct.
What to do if my Daikin Air Conditioner stops suddenly and the OPERATION lamp flashes?
If your Daikin Air Conditioner suddenly stops and the OPERATION lamp flashes, clean the air filters and remove any obstacles. Turn the breaker OFF, then turn it back ON, and try operating the air conditioner with the remote controller.
What to do if my Daikin Air Conditioner has an abnormal functioning during operation?
If your Daikin Air Conditioner malfunctions during operation, it might be due to lightning or radio waves. Turn the breaker OFF, then turn it ON again, and try operating the air conditioner with the remote controller.
General| Brand | Daikin |
|---|---|
| Model | FTXS20DVMA |
| Category | Air Conditioner |
| Language | English |
To Next Page