Do you have a question about the Daikin FTXS20K3V1B and is the answer not in the manual?
Cooling Capacity | 2.0 kW |
---|---|
Heating Capacity | 2.5 kW |
Power Supply | 1 Phase, 220-240 V, 50 Hz |
Refrigerant | R32 |
Indoor Unit Dimensions (HxWxD) | 283 x 770 x 198 mm |
Indoor Unit Weight | 8 kg |
Outdoor Unit Dimensions (HxWxD) | 550 x 658 x 275 mm |
Outdoor Unit Weight | 28 kg |
Star Rating | 5 Star |
Power Consumption Cooling | 0.57 kW |
Outdoor Unit Noise Level | 46 dBA |
Essential safety guidelines and warnings for operating the air conditioner.
Identifies and describes the components of the indoor and outdoor units.
Steps for setting up the remote controller and initial unit preparation.
Explains how to select and use different operating modes like AUTO, COOL, HEAT, DRY, FAN.
Instructions on how to adjust the desired temperature for cooling or heating.
Guides on controlling the direction and swing of airflow for comfort.
Details on setting the fan speed from quiet to high.
How to set airflow to avoid direct contact with occupants.
Utilizes a sensor to detect human presence for energy saving.
Maximizes cooling/heating effect quickly for a limited time.
Reduces noise level of the outdoor unit for nighttime use.
Limits maximum power consumption for energy efficiency.
Instructions for setting the unit to turn off automatically.
Instructions for setting the unit to turn on automatically.
Setting multiple timers for daily or weekly operation schedules.
How to select modes when multiple indoor units are connected.
Explains how priority is given to a specific room's settings.
Step-by-step guide for removing and cleaning the front panel.
Instructions on how to pull out, wash, and replace air filters.
Details on cleaning and replacing the specialized air-purifying filter.
Procedures for long-term storage and recommended periodical maintenance.
Addresses common problems like flap movement and airflow stoppage.
Covers issues like mist generation, outdoor fan rotation, and odor.
Details problems with HEAT operation, timer settings, and remote control.
How to use the remote to diagnose unit faults via error codes.
Explains the meaning of LED lights on the outdoor unit PCB for diagnostics.