EasyManua.ls Logo

Daikin FTXS20K3V1B - Adjusting Airflow Rate

Daikin FTXS20K3V1B
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
To adjust the airow rate setting
Press .
Each pressing of advances the airow rate setting in sequence.
Auto Indoor unit quiet Low Middle low
MiddleMiddle highHigh
When the airow is set to “ ”, indoor unit quiet operation will start and the noise
from the unit will become quieter.
In indoor unit quiet operation, the airow rate is set to a weak level.
If the temperature does not reach the desired point in the indoor unit quiet operation,
change the airow rate setting.
In DRY mode, the airow rate setting is not variable.
NOTE
Notes on the angles of the ap
The ap swinging range depends on the operation. (See the gure.)
FAN operationHEAT operationCOOL and
DRY operation
Upper limit
Stop operation
Lower limit
Upper limit
Upper limit
COMFORT AIRFLOW
Stop operation Stop operation
Lower limit
Lower limit
45°
COMFORT AIRFLOW
15°
45°
50°
45°
If the air conditioner is operated in COOL or DRY operation with the ap kept stopped in the downward direction, the ap will automatically
start operating in approximately an hour in order to prevent dew condensation.
Note on airow rate setting
At smaller airow rates, the cooling (heating) effect is also smaller.
CAUTION
Always use a remote controller to adjust the angles of the ap. If you attempt to move the ap and louvers forcibly with hand when they are
swinging, the mechanism may be broken.
Be careful when adjusting the louvers, since a fan is rotating inside the air outlet at a high speed.

Other manuals for Daikin FTXS20K3V1B

Related product manuals