Daikin FTXS09JEVJU - Page 22

Removal of Swing Motor / PCBs Si041051
20 Removal Procedure
5
Unfasten the 4 hooks.
Lift up the upper part of
the control PCB and
remove it.
6
The figures show the
control PCB.
Pattern 1 [S5]: thermal fuse
[S6]: swing motor
[S26]: display PCB
[S32]: indoor heat exchanger
thermistor
[S200]: fan motor

Some models have no
harness for [S5].
Pattern 2 [S1] [S7]: fan motor
[S5]: thermal fuse
[S6]: swing motor
[S26]: display PCB
[S32]: indoor heat exchanger
thermistor

Some models have no
harness for [S5].
Step Procedure Points
(R11943)
Control
PCB
Hook
Hook
S32
S200
S24
S26
(R15846)
[S26]
[S6]
[S32]
[S5]
[S200]
Fuse
(250 V, 3.15 A)
(R15847)
[S1]
[S5]
[S7]
[S32]
[S6]
[S26]