Daikin FTXS09JEVJU - Page 24

Removal of Indoor Heat Exchanger Si041051
22 Removal Procedure
5
Disconnect the flare nut
for liquid piping.
2. Remove the indoor heat
exchanger.
1
Remove the indoor unit
from the installation
plate.
2
Unfasten the hook of
the piping fixture on the
back of the indoor unit.
Step Procedure Points
(R17302)
Gas piping
Liquid piping
(R17303)
Auxiliary piping
Piping fixture
(R8038)
(R8039)