Turn the breaker on
Turning on the breaker opens once and closes the louver. (This is a normal •
procedure.)
To set the clock
Press 1. .
“ ” is displayed.
“
” and “ ” blinks.
Press 2. to set the current day of the week.
Press
3. .
“ ” blinks.
Press 4. to set the clock to the present time.
Holding down • or rapidly increases or decreases the time display.
Press 5. .
Always point the remote controller at the indoor unit when pressing the buttons when •
setting the indoor unit’s internal clock.
“ ” blinks.
01_EN_3P253185-1.indd 1001_EN_3P253185-1.indd 10 9/16/2009 4:04:48 PM9/16/2009 4:04:48 PM
To Next Page
Loading...
